Research and Simulation of Cross Flow Heat Exchanger

Authors

Chengyun Wu, Shanghai Aviation Design Research Institute, Commercial Aircraft Corporation of China, Ltd., Shanghai 201210, China;
Guangwen Wang, Shanghai Aviation Design Research Institute, Commercial Aircraft Corporation of China, Ltd., Shanghai 201210, China;
Geping Li, Shanghai Aviation Design Research Institute, Commercial Aircraft Corporation of China, Ltd., Shanghai 201210, China;
Xudong Xin, Shanghai Aviation Design Research Institute, Commercial Aircraft Corporation of China, Ltd., Shanghai 201210, China;

Abstract

Abstract: Based on cell concept, the lumped parameter method was applied and the parameters in single heat exchanger cell were deduced. Thereafter 1, 4, 9,100 cells heat exchanger simulation model was set up and the simulation error and its influencing factors were analyzed. To simplify the algorithm and increase the calculation speed, as well as improve the accuracy of cross flow heat exchanger, the simplified heat exchanger model was proposed and reviewed. The research results show that the calculation of simplified heat exchanger is precise and the algorithm is simple. The model could be widely applied in cross flow heat exchanger computation.

Recommended Citation

Wu, Chengyun; Wang, Guangwen; Li, Geping; and Xin, Xudong (2020) "Research and Simulation of Cross Flow Heat Exchanger," Journal of System Simulation: Vol. 27: Iss. 9, Article 40.
Available at: https://dc-china-simulation.researchcommons.org/journal/vol27/iss9/40

First Page

2220

Revised Date

2015-07-23

DOI Link

https://doi.org/

Last Page

2225

CLC

TP391.9

Recommended Citation

Wu Chengyun, Wang Guangwen, Li Geping, Xin Xudong. Research and Simulation of Cross Flow Heat Exchanger[J]. Journal of System Simulation, 2015, 27(9): 2220-2225.