Optimized Analysis of Milling Thin-wall Parts Based on SHELL Element Models

Authors

Yusong Liao, 1. Department of Mechanical and Automotive Engineering, Chuzho Vocational and Technology College, Chuzhou 239000, China; ;
Han Jiang, 2. Institute of Mechanical and Automotive Engineering, Hefei University of Technology, Hefei 230003, China;

Abstract

Abstract: As to milling the thin-wall part accurately, here with the finite element model composed of SHELL elements, the effects of lowering position, size of the part and cutting parameters to the deformations of the thin-wall part were analyzed and compared, and the corresponding theoretical analysis was provided. The conclusions can be got as; the model composed of SHELL elements can analyze the factors causing the deforroations of the thin-wall part and optimize the cutting method and cutting parameters effectively to improve the machining accuracy and efficiency.

Recommended Citation

Liao, Yusong and Jiang, Han (2021) "Optimized Analysis of Milling Thin-wall Parts Based on SHELL Element Models," Journal of System Simulation: Vol. 27: Iss. 6, Article 32.
DOI: 10.16182/j.cnki.joss.2015.06.032
Available at: https://dc-china-simulation.researchcommons.org/journal/vol27/iss6/32

First Page

1381

Revised Date

2015-03-31

DOI Link

https://doi.org/10.16182/j.cnki.joss.2015.06.032

Last Page

1387

CLC

TG54

Recommended Citation

Liao Yusong, Han Jiang. Optimized Analysis of Milling Thin-wall Parts Based on SHELL Element Models[J]. Journal of System Simulation, 2015, 27(6): 1381-1387.

DOI

10.16182/j.cnki.joss.2015.06.032