Research on Welding Process Modeling and Narrow Operating Area Searching for Shipbuilding Block

Authors

Zhaohui Wu, 1. Jiangnan Shipyard (Group) Co., Ltd., Shanghai 201913, China;;
Yunfei Yang, 2. Institute of Intelligent Manufacturing and Information Engineering, Shanghai Jiaotong University, Shanghai 200240, China;
Qianya Cai, 1. Jiangnan Shipyard (Group) Co., Ltd., Shanghai 201913, China;;
Wenmin Zhu, 2. Institute of Intelligent Manufacturing and Information Engineering, Shanghai Jiaotong University, Shanghai 200240, China;

Abstract

Abstract: To solve the status that the welding operation is difficult because of the narrow segmented regions in shipbuilding block, the searching algorithm of narrow operating area combined with welding process simulation model was presented. Block model of ship, welding process model and welding resource model were completed to establish the block welding process simulation model. The collision and interference detection was used to check the space required by the welding operation rapidly, and then the potential narrow operating area based on the sequence planning of assembly process was achieved. The area can provide effective input for the man-machine engineering assessment of ship design. Prototype system was developed based on the methods above, and the effectiveness of this method has been proved by an example.

Recommended Citation

Wu, Zhaohui; Yang, Yunfei; Cai, Qianya; and Zhu, Wenmin (2020) "Research on Welding Process Modeling and Narrow Operating Area Searching for Shipbuilding Block," Journal of System Simulation: Vol. 28: Iss. 10, Article 50.
Available at: https://dc-china-simulation.researchcommons.org/journal/vol28/iss10/50

First Page

2638

Revised Date

2016-07-14

DOI Link

https://doi.org/

Last Page

2645

CLC

TP391.9

Recommended Citation

Wu Zhaohui, Yang Yunfei, Cai Qianya, Zhu Wenmin. Research on Welding Process Modeling and Narrow Operating Area Searching for Shipbuilding Block[J]. Journal of System Simulation, 2016, 28(10): 2638-2645.