Fast Implementation of Virtual Prototyping Modeling Based on Assembly Model

Authors

Wang Yu, School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;
Shouwen Yao, School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;
Jilin Liu, School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;
Dezhi Huang, School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;
Qinghua Zhang, School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;
Yi Ran, School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;

Abstract

Abstract: A new method of virtual prototyping modeling was proposed based on assembly model, concerning the relation between assembly forms and dynamic constrains. With the transformation of assembly forms and dynamic constrains, a virtual prototyping model was built by the use of constrain models. Analysis of principle of modeling virtual prototype based on assembly was carried out, and the corresponding relationship between the assembly constraints in Pro/E and constraint block was studied and the method of modeling gear transmission was researched. With the utility of SimMechanics, a model library facing mechanism analysis under Simulink, a concept verification of a simple self-built machine was executed. The result shows that the method of virtual prototyping modeling based on assembly model is feasible, and this method provides technological base for researching the prototype performance influenced by assembly.

Recommended Citation

Yu, Wang; Yao, Shouwen; Liu, Jilin; Huang, Dezhi; Zhang, Qinghua; and Ran, Yi (2020) "Fast Implementation of Virtual Prototyping Modeling Based on Assembly Model," Journal of System Simulation: Vol. 28: Iss. 9, Article 2.
Available at: https://dc-china-simulation.researchcommons.org/journal/vol28/iss9/2

First Page

1937

Revised Date

2015-07-30

DOI Link

https://doi.org/

Last Page

1944

CLC

TP391.9

Recommended Citation

Wang Yu, Yao Shouwen, Liu Jilin, Huang Dezhi, Zhang Qinghua, Yi Ran. Fast Implementation of Virtual Prototyping Modeling Based on Assembly Model[J]. Journal of System Simulation, 2016, 28(9): 1937-1944.