Simulation Analysis on Flexible Track Drilling Machine Based on ADAMS

Authors

Yanchao Zhang, School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China;
Ting Wang, School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China;
Danlong Song, School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China;

Abstract

Abstract: The three-dimensional model of the flexible track drilling machine is designed by the virtual prototyping technology. The model is imported into ADAMS (Automatic Dynamic Analysis of Mechanical Systems) software to carry out the kinematics and dynamic simulation analysis of its virtual prototype, and the rationality and feasibility of the system design are evaluated. Through the comparative analysis, the reasonable driving velocity and acceleration parameters of the hole making system are given. According to the analysis of the dynamic characteristics of the systems, the asymmetric driving problems in the system are found and the corresponding improvement scheme is put forward. It provides a reference to the optimization of the structure and motion scheme of the flexible track system, the improvement of the product development cycle time and the reduction of the development cost. It may build the foundation for the efficient assembly of the high-precision aircraft.

Recommended Citation

Zhang, Yanchao; Wang, Ting; and Song, Danlong (2020) "Simulation Analysis on Flexible Track Drilling Machine Based on ADAMS," Journal of System Simulation: Vol. 32: Iss. 3, Article 11.
DOI: 10.16182/j.issn1004731x.joss.18-0279
Available at: https://dc-china-simulation.researchcommons.org/journal/vol32/iss3/11

First Page

438

Revised Date

2018-10-31

DOI Link

https://doi.org/10.16182/j.issn1004731x.joss.18-0279

Last Page

445

CLC

V262.4;TH165

Recommended Citation

Zhang Yanchao, Wang Ting, Song Danlong. Simulation Analysis on Flexible Track Drilling Machine Based on ADAMS[J]. Journal of System Simulation, 2020, 32(3): 438-445.

DOI

10.16182/j.issn1004731x.joss.18-0279