Research on Modeling Technology for Hard Cutting Process

Authors

Caixu Yue, 1. School of Mechaical and Dynamic Engineering, Harbin University of Science and Technology, Harbin 150080, China;;
Liu Xin, 1. School of Mechaical and Dynamic Engineering, Harbin University of Science and Technology, Harbin 150080, China;;
Jiang Nan, 1. School of Mechaical and Dynamic Engineering, Harbin University of Science and Technology, Harbin 150080, China;;
Xianli Liu, 1. School of Mechaical and Dynamic Engineering, Harbin University of Science and Technology, Harbin 150080, China;;
Genghuang He, 2. Xiamen Golden Egret Special Alloy Co., Ltd, Xiamen 361100, China;
Lingxiang Li, 2. Xiamen Golden Egret Special Alloy Co., Ltd, Xiamen 361100, China;

Abstract

Abstract: The hard cutting has the features of the high maching flexibility, economical efficiency and environmental friendliness, and is widely used in automobile industry, bearing industry, hydraulic industry, etc. The simulation modeling not only plays an important role in predicting the performance of the hard machining and optimizing machining parameters, but also better reflects the nature of the machining and provides the theoretical guidance to the actual machining. The simulation modeling methods of the hard cutting at home and abroad are introduced, and the chip formation, cutting force, cutting temperature, tool wear and machined surface quality are summarized, and the future development is preliminarily forecasted.

Recommended Citation

Yue, Caixu; Xin, Liu; Nan, Jiang; Liu, Xianli; He, Genghuang; and Li, Lingxiang (2020) "Research on Modeling Technology for Hard Cutting Process," Journal of System Simulation: Vol. 32: Iss. 6, Article 2.
DOI: 10.16182/j.issn1004731x.joss.18-0719
Available at: https://dc-china-simulation.researchcommons.org/journal/vol32/iss6/2

First Page

982

Revised Date

2019-01-08

DOI Link

https://doi.org/10.16182/j.issn1004731x.joss.18-0719

Last Page

999

CLC

TP391.9

Recommended Citation

Yue Caixu, Liu Xin, Jiang Nan, Liu Xianli, He Genghuang, Li Lingxiang. Research on Modeling Technology for Hard Cutting Process[J]. Journal of System Simulation, 2020, 32(6): 982-999.

DOI

10.16182/j.issn1004731x.joss.18-0719